Displaying Information About The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
You can run the command to view information about the software version, chassis type, main
control board version, and LPU version of the S9300.
1.2.3 Displaying the Power Status of the S9300
You can use display commands to view information about the power status and power of the
S9300.
1.2.4 Displaying the Board Voltage
You can use the display command to view the board voltage status, including the current voltage,
the upper threshold of the voltage, and the lower threshold of the voltage.
1.2.5 Displaying the Temperature
You can use the display command to view the board temperature, including the current
temperature, the upper threshold of the temperature, and the lower threshold of the temperature.
1.2.6 Displaying the Fan Status
You can use the display command to view the fan status, including the fan running status, fan
registration status, fan rotation speed, and fan mode.
1.2.7 Displaying the CPU Usage
When the CPU usage is high, you can run the display cpu-usage command to check the CPU
usage and disable unnecessary functions whose CPU usage is high.
1.2.8 Displaying the Memory Usage
You can use the display command to view the memory usage statistics and threshold.
1.2.9 Displaying the Environment Version
You can use the display command to view the versions of the System Management Software
(SMS) and the Controller Area Network bus (CANbus).
1.2.10 Displaying the Interface Status
You can use the display command to view the running status, basic configuration, and packet
forwarding on an interface.
1.2.11 Displaying Electronic Labels
You can use the display command to view information about electronic labels, including the
board type, BOM code, description, manufacture date, vendor name, issuing number, Common
Language Equipment Identification (CLEI) code, and sales BOM code.
1.2.12 Displaying Alarm Information
You can use the display command to view alarm information during the running of the S9300.
1.2.13 Displaying Diagnostic Information
You can use the display diagnostic-information command to collect the running information
of all modules for fault location instead of running all the related display commands.
1.2.14 Displaying the Health Status
You can use the display command to view the health status information, including the CF card
or flash usage, CPU usage, memory usage, power supply status, fan status, voltage, and
temperature.
1.2.15 Displaying Information About a Transceiver on the Interface
You can use the display command to view information about the optical module of an interface,
including the specifications, manufacturer, and alarm information about the optical module.

1.2.1 Displaying Information About the S9300

You can use the display command to view information about S9300 components.
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Displaying the Device Status
1-3