12. Select a MicroDock II to save the configuration file and click OK.
The following dialog box displays.
13. Click OK.
14. Refer to
Reconfiguring the Detector (not applicable to the
GasAlertClip Extreme)
to download the new configuration to the
detector.
Base Station MMC/SD Card
Event Logging
Bump tests and calibrations are recorded on a MultiMediaCard (MMC) or
a Secure Digital (SD) card. The MMC/SD card is located in the base sta-
tion inside the battery compartment. It stores test records that are then
downloaded from the base station to a PC.
The following detectors transfer event logs to the base station MMC dur-
ing a bump test or calibration:
•
GasAlertClip Extreme (bump test only)
•
GasAlert Extreme
•
GasAlertMicroClip
•
GasAlertMax XT
•
GasAlertQuattro
MicroDock II
Base Station MMC/SD Card
75