MicroDock II
User Manual
Display Elements
Table 3. Display Elements
Icon
AC power
Batteries charged*
Batteries half-charged*
Batteries at low level*
MMC or SD card
MMC or SD card not inserted
Test pass
Test fail
Cursor and sensor disabled
Scroll up
Scroll down
Selection arrow
Selected to be modified
Pass code protected
* If powering the base station with batteries.
8
Description
Pushbuttons
Docking Module Pushbuttons
Table 4. Docking Module Pushbuttons
Pushbutton
C
BUMP CHECK
C
CALIBRATION
C
DATA TRANSFER
Description
To bump test a detector, press
CHECK.
After connecting a new docking module,
press and hold
C
BUMP CHECK to
send a confirmation signal back to the
base station.
To calibrate a detector, press
BRATION (all models excluding
GasAlertClip Extreme).
To transfer datalog/event log information
C
from a detector, press
DATA TRANS-
FER. (GasAlert Extreme,
GasAlertMicroClip, GasAlertMax XT, and
GasAlertQuattro only).
The Automatic Datalog Download option
is available for the GasAlertMicroClip,
GasAlertMax XT, and GasAlertQuattro
docking modules only. For more informa-
tion, refer to
Automatic Datalog Down-
load (GasAlertMicroClip, GasAlertMax
XT, and GasAlertQuattro
only).
C
BUMP
C
CALI-