20. Repeat step #19 for the remaining values.
The following screen displays the corresponding lot number for
the attached gas cylinder.
C
21. Press
changes back to
exit.
22. To setup another inlet, repeat the procedures listed in the
Type,
Gas Concentration
sections.
23. When all of the entries are completed, press
the user options menu.
C
24. Press
exit again to return to normal operation.
Pump Setup
Refer to
Defining Pump Speed
section.
.
Level, and the
Gas Cylinder Lot # Field
C
exit to return to
in the
Adding Another Docking Module
Contrast
Contrast brightens or darkens the LCD. To adjust the contrast level,
complete the following:
1. From the user options menu, press
the Contrast option.
2. Press
C
sel to confirm the selection and access the field
Gas
( changes to
The contrast levels range from 2 (brightest) to 10 (darkest).
The base station is shipped with the contrast level defined
as 5.
C
3. Press
4. Press
C
sel to save the new value and exit the field
(
changes back to ).
User Options Menu
C
).
Note
C
or
to select the desired contrast level.
MicroDock II
or
C
to scroll to
45