Mounting The Microdock Ii - BW Technologies MicroDock II User Manual

Figure 18. Parts of the Wall Mounting Plate
Table 15. Mounting the MicroDock II
Item
1
Wall mounting plate (2)
2
Grommet (4)
3 Phillips self-tapping screw (8)
The base station and docking modules can be easily mounted to a
secure surface. To mount the base station and docking modules, com-
plete the following:
Description
1. Determine a secure location to mount the base station.
Using the screws that are provided, attach the wall mounting
plates to the base station and docking modules.
2. When the plates are mounted on the base station, measure hori-
zontally on the wall a distance of 2.38 in. (60.32 mm) for the base
station width.
If mounting two or more docking modules that are attached on
the wall, measure horizontally on the wall a distance of 1.64 in.
(41.7 mm) of space between each docking module.
3. Use four screws to attach the base station to the secure surface.
MicroDock II

Mounting the MicroDock II

33