Adding Another Docking Module; Torque Specifications - BW Technologies MicroDock II User Manual

Adding Another Docking Module

If required, refer to Using the Base Station
module.
Only one module can be connected at a time. Complete steps #1-
20 for each docking module that is added.
To add another docking module, refer to
• Table 13.
• Table 14.,
• Figure 14.,
• Figure 15., and
• Figure 16.,
• and complete the following procedures:
Table 13. Torque Specifications
Housing Assembly
Alligator clip
Wall mounting plate
before adding a docking
a Warning
Torque
4-5 in lbs
9-10 in lbs

Adding Another Docking Module

Table 14. Adding Another Docking Module
Item Description
1
Phillips pan-head screw (3)
2
End plate
3
Barbed fitting ports
4
Gasket block
5
Phillips flat-head screw
6
PCB connectors
7
Bottom cover plate
MicroDock II
27