Installing The Privacy Shield; Connecting The Device; Multiport Cable - VeriFone MX 880 Installation Manual

Installing the
Privacy Shield
Connecting the
Device
WARNING

Multiport Cable

NOTE
To install the privacy shield, insert one of the tabs on the shield into one of the
slots on the side of the keypad and snap into place.
Figure 14

Installing the Privacy Shield

This section provides brief descriptions of possible MX 800 Series terminal device
connections and the power pack connection. For complete information about
installing and using an optional device, see the user documentation supplied with
that device.
Ensure that the multiport cable is not connected to a power pack before attaching
the multiport cable to the MX 800 Series terminal.
The MX 800 Series terminals use a multiport cable
connections, including connections to:
•
ECR
•
Ethernet LAN
•
Development/host PC
•
Serial cable
•
USB
•
USB device
•
Power input
•
Audio output
Some multiport cables require additional cabling to work; for example a pigtail for
certain ports or Ethernet cable.
(Figure 15) to make most
MX 800 S I
ERIES NSTALLATION
17
G
UIDE