Raised Platform Mounting; Floor Mounting - Saturn 125 Operator's Manual

Mounting the Furnace (continued)

Raised Platform Mounting

WARNING: To prevent serious personal
injury, make sure the platform is designed to
safely bear the weight of the furnace and allow safe
servicing of furnace components. The platform must be
constructed of non-combustible materials (e.g. steel)
and must be securely anchored to an adjacent wall.
1. Refer to Figure 4D.
2. Follow the instructions as provided in the
diagram.
3. Use a spirit level to make sure the cabinet is
level side to side and front to back.

Floor Mounting

WARNING: To prevent serious personal injury, make sure the floor can safely bear the weight of the
furnace.
CAUTION: The minimum distance allowed from the floor to the base of the unit is 60 inches. If the
clearance is less than 60 inches to the base of the unit a hot air diffuser, or hood, must be used to direct
the hot air away from the furnace.
Saturn™ 140 hot air diffuser
Saturn™ 230 hot air diffuser
1. Refer to Figure 4E.
2. Use a spirit level to make sure the cabinet is level side to side and front to back.
WARNING: The support stand must be constructed of non-combustible materials (e.g. steel) and
must be securely anchored to the floor.
Operator's Manual: Models Saturn™ 140 & Saturn™ 230
Clean Burn part #90244
Clean Burn part #90245
Figure 4D - Furnace Installed on
Raised Platform
4-5