Warranty Registration - Saturn 125 Operator's Manual

Unpacking Items Packed Inside the Furnace
To unpack the items packed inside the furnace cabinet (in the combustion chamber), you will need to
open the combustion chamber door.
1. Remove the three nuts which hold the combustion chamber door closed. Set the nuts aside in a safe
place for later re-installation after the combustion sleeve has been installed (Section 3).
2. Carefully swing the combustion chamber door open. Remove and inspect the components packed
inside.
3. Leave the door unfastened (open) for assembly/installation procedures to be accomplished in the
next section.
I89085

Warranty Registration

For proper warranty registration, Clean Burn requires that you fill out the provided warranty registration
card and return it within 30 days to:
Operator's Manual: Models Saturn™ 140 & Saturn™ 230
Figure 2A - Accessing the Combustion Chamber
CLEAN BURN WARRANTY REGISTRATION
Clean Burn, LLC.
4109 Capital Circle Drive
Janesville, WI 53546
2-2