Guidelines For Furnace Usage - Saturn 125 Operator's Manual

For Your Safety... (continued)

Guidelines for Furnace Usage

This furnace is listed for commercial and/or industrial use only; it is not listed for
residential use.
This furnace is listed with Underwriters Laboratory and Underwriters' Laboratories
of Canada to burn the following fuels:
• #2 fuel oil
• Used crankcase oil up to 50 SAE
• Used hydraulic oil
• Used transmission fluid (U.S.)
• #4 and #5 fuel oil (U.S.)
Make sure you comply with all EPA regulations concerning the use of your furnace.
EPA regulations require that:
• Your used oil is generated on-site. You may also accept used oil from
"do-it-yourself" oil changers.
• Hazardous wastes, such as chlorinated solvents, are NOT to be mixed
with your used oil.
• The flue gases are vented to the outdoors with an appropriate stack.
• Your used oil is recycled as fuel for "heat recovery". DO NOT operate
your furnace in warm weather just to burn oil.
Contact your Clean Burn dealer for current EPA regulations.
If your furnace ever requires service, call your Clean Burn dealer. DO NOT allow
untrained, unauthorized personnel to service your furnace. Make sure that your
furnace receives annual preventative maintenance to ensure optimal performance.
Operator's Manual: Models Saturn™ 140 & Saturn™ 230
1-4