Disarming Without A Transmitter - Avital 5303 Owner's Manual

Disarming without a transmitter

If your remote transmitter is lost or damaged, you can manually disarm
your vehicle security system. To disarm the system without a transmitter,
you must have the vehicle's ignition key and know where the Valet
switch is located. Be sure to check with your installer at the time of
installation for both the location and the preset response (1-5 presses)
of the Valet switch.
To disarm the security system:
1. Turn the ignition to the ON position.
2. Press the Valet button the preset number of times (one to fve times)
within15 seconds.
After fve seconds, the system will disarm. If the system does not
disarm, you may have waited too long. Start over by turning the
ignition off and on.
Location of Valet Button_________________________________
Number of Presses_____________________________________
Important:
respond to 1-5 presses for the disarm function. You
must check with the installer to verify the programming
for your individual unit.
24
The Valet button can be programmed to
© 2011 Directed Electronics. All rights reserved.