Power Saver Mode - Avital 5303 Owner's Manual

Power saver mode

Your system will automatically enter Power Saver Mode while armed or
in Valet Mode, after a period of time in which no operation has been
performed. This lowers the current draw on the vehicle's battery. Power
Saver Mode takes over under the following conditions:
• Power Saver when the system is armed: After the system has been
armed for 24 hours the LED will flash at half its normal rate, de-
creasing the system's current draw.
• Power Saver in Valet Mode: When the system enters Valet Mode
the LED illuminates steadily. If the vehicle is not used (ignition is
not turned on) for a one hour period while the system is in Valet
Mode, the LED will shut off. If the system remains in Valet Mode,
the LED will come back on the next time the ignition is turned on
and then back off.
40 © 2011 Directed Electronics. All rights reserved.