Setting The Clock - Avital 5303 Owner's Manual

• Hood Trigger - Opening the hood will sound the siren, flash the
lights for the programmed duration, and report Zone 1.
• Trunk Trigger - Opening the trunk (if connected) will instantly sound
the siren and flash the lights for the programmed duration and
report Zone 4.
• Ignition Trigger - If the ignition is turned on the siren will chirp for
three seconds, then the siren will sound and the lights will flash for
the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
• Repeat four quick beeps (or vibrate) for 15 seconds.
• The full trigger alert icon (28) will turn on for 15 seconds.

Setting the clock

To set the clock press and hold
will chirp twice and the hour selection will
start flashing. Immediately press
to reverse the hour selection.
Once the correct hour is displayed press
selection will start flashing. Then press
selection or to reverse the minute selection. Once the correct time
is displayed simply stop pressing all buttons for 15 seconds and the
transceiver will automatically exit the clock mode.
18
�������
for fve seconds, the transceiver
to advance the hour selection or
�������
�������
�������
© 2011 Directed Electronics. All rights reserved.
again and the minute
to advance the minute