Disarming Without A Transmitter - Avital 5303 Owner's Manual

nience, in case the system is accidentally triggered.
➜

Disarming without a transmitter

If your remote transmitter is lost or damaged, you can manually
disarm your vehicle security system. To disarm the system
without a transmitter, you must have the vehicle's ignition key
and know where the Valet
with your installer at the time of installation for both the location
and the preset response (1-5 presses) of the Valet
Location of Valet Button_________________________________
Number of Presses_____________________________________
Important! The Valet button can be programmed to
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.
16
®
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet button the
preset number of times (one to
five times) within 15 seconds.
After five seconds, the system will
disarm. If the system does not
disarm, you may have waited too
long; turn the ignition off and on
and try again.
switch is located. Be sure to check
© 2008 Directed Electronics—All rights reser ved
switch.
®
DRW-35