Standard Configuration; Transmitter Configurations; Rapid Resume Logic - Avital 2101L Installation Manual

Transmitter Configurations

The transmitters can be programmed with the standard or single button arm/disarm configurations
by using the Auto Learn functions in the Transmitter/Receiver Learn Routine.

Standard Configuration

A remote that uses the standard configuration operates similarly to many factory keyless entry
remotes. A standard configuration transmitter allows arming, disarming, and Panic Mode activation
with separate buttons. When programmed for standard configuration using the Channel 1 Auto-
learn configuration, the transmitter buttons are assigned to the following functions:
and

Rapid Resume Logic

Rapid Resume Logic ensures that the when the system is powered up it will return to the same state
it was in when power is disconnected. For a full description of Rapid Resume Logic refer to the
owner's manual.
© 2008
Directed Electronics
operates Arm only
operates Disarm only
operates Channel 2 and Silent Mode
operates Panic only
operate Channel 3
14