Avital 5303 Owner's Manual page 39

Table of zones
A zone is represented by the number of LED flashes used by the system
to identify a particular type of input. Standard input assignments are
listed in the following table, along with spaces to write in any optional
sensors or switches that have been installed.
Zone Description
1 Trunk Pin
2 Instant trigger: a heavier impact
detected by the onboard shock
sensor
3 Door switch trigger
4 Instant trigger: For optional
sensors
5 Ignition trigger
6 Hood Pin
Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notifcation when arming or a Tamper
Alert notifcation when disarming, look at the LED in the vehicle. Active
or triggered zones will be indicated by a pattern of blinks by the LED.
For example:
If zone 3 was active or triggered, the LED will blink three
times with a two-second pause. Then it will blink three times again, and
repeat until the ignition is turned on.
Your system stores the last two triggered zones in memory. If your system
has been triggered but the LED has been reset by turning on the igni-
tion, your dealer can still recall the last two zones that were triggered.
Contact your dealer for details.
© 2011 Directed Electronics. All rights reserved.
Dealer installed options
37