Valet mode
You can prevent your security system from automatically arming and
triggering by using Valet® Mode. This is very useful when washing the
vehicle or having it serviced. In Valet Mode, the security system will
not arm, even with the remote transmitter, but all convenience functions
(door locks, trunk release, etc.) will continue to work normally.
To enter or exit Valet Mode:
1.
Turn the ignition on.
2.
Turn the ignition off.
3.
Press and release the Valet button within 10 seconds.
The status LED lights solidly if you are entering Valet Mode, and goes
off when you exit Valet Mode.
To enter or exit Valet Mode using the transmitter:
1.
Open any vehicle door.
2.
Press
.
3.
Press
and then press
�������
The status LED lights solidly if you are entering Valet Mode, and goes
�������
off when you exit Valet Mode.
26
again.
�������
© 2011 Directed Electronics. All rights reserved.