L2Vpn Enable; Log-Peer-Change - HP FlexFabric 5930 Series Command Reference Manual

Parameters
is-name: Assigns a hostname to the device, a string of 1 to 64 characters.
Usage guidelines
ISIS-SPB uses a 6-byte system ID to represent a node in the network. This representation method is
difficult for administrators to identify devices when they examine ISIS-SPB adjacencies, FDB entries, and
LSDB entries.
Dynamic hostname exchange enables you to assign a symbolic hostname to each SPBM node. ISIS-SPB
advertises this information in the Dynamic hostname TLV in LSPs to remote LSDBs.
Examples
# Enable dynamic hostname exchange and assign the ISIS-SPB hostname spbm to the device.
<Sysname> system-view
[Sysname] spbm
[Sysname-spbm] is-name spbm

l2vpn enable

Use l2vpn enable to enable L2VPN.
Use undo l2vpn enable to disable L2VPN.
Syntax
l2vpn enable
undo l2vpn enable
Default
L2VPN is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable L2VPN before configuring other L2VPN settings.
Examples
# Enable L2VPN.
<Sysname> system-view
[Sysname] l2vpn enable

log-peer-change

Use log-peer-change to enable outputting ISIS-SPB adjacency changes to the configuration terminal.
Use undo log-peer-change to disable outputting ISIS-SPB adjacency changes to the configuration
terminal.
Syntax
log-peer-change
57