Display Spbm Ect-Migration I-Sid - HP FlexFabric 5930 Series Command Reference Manual

Inactive B-VLANs: N/A
Command output
1.
Field
Algorithm
Mask
Active B-VLANs
Inactive B-VLANs

display spbm ect-migration i-sid

Use display spbm ect-migration i-sid to display ECT migration information for an I-SID.
Syntax
display spbm ect-migration i-sid i-sid [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
i-sid: Specifies an I-SID in the range of 255 to 16777215.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a
subordinate device, the command displays information for the master device.
Examples
# Display ECT migration information for I-SID 300.
<Sysname> display spbm ect-migration i-sid 300
ECT
00-80-c2-01
Command output
1.
Field
ECT
B-VLAN
T
Description
ECT algorithm.
ECT algorithm mask.
Active B-VLANs mapped to the ECT algorithm. Active B-VLANs are VLANs
mapped to MSTI 4092.
This field displays N/A if no active B-VLANs are mapped to the algorithm.
Inactive B-VLANs mapped to the ECT algorithm. This field displays N/A if no
inactive B-VLANs are mapped to the algorithm.
B-VLAN T R
1 0 1
Description
ECT algorithm.
B-VLAN assigned to the I-SID.
Transmit (T) bit identifies the device's transmitter status in the multicast group for the I-SID:
•
1—T bit set. The device is a transmitter. If tandem replication is used, the BEB sets the
T bit.
•
0—T bit not set. The device is not a transmitter. If head-end replication is used, the BEB
does not set the T bit.
20