Spbm Enable; Spbm Timer Hello - HP FlexFabric 5930 Series Command Reference Manual

Setting an interface-specific value in interface view.
•
• Setting a global value in SPBM view. This global value applies to all SPBM-enabled interfaces.
Setting a bandwidth reference for the system to calculate a value automatically for the interface.
•
The system chooses a link metric value for an interface in order of interface-specific value, global value,
and autocalculated value.
Examples
# Set the SPBM link metric to 5 on FortyGigE 1/0/1.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] spbm cost 5

spbm enable

Use spbm enable to enable SPBM on an interface.
Use undo spbm enable to restore the default.
Syntax
spbm enable
undo spbm enable
Default
SPBM is disabled on interfaces.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
You must enable SPBM on the provider network ports on all BEBs and BCBs.
You can configure SPBM parameters on an interface only after the SPBM feature is enabled on the
interface.
All SPBM-related settings are removed from the interface after you disable SPBM on the interface.
Examples
# Enable SPBM on FortyGigE 1/0/1.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] spbm enable

spbm timer hello

Use spbm timer hello to configure the ISIS-SPB hello interval on an interface.
Use undo spbm timer hello to restore the default.
Syntax
spbm timer hello seconds
69