Unsubscribing The System; Renaming The System - Avaya 3730 Communications Manual

If you do not enter the system name, the default name is used. For example, System A,
System B.
7. Press Next.
8. Enter PARK code (max. 31 digits). The PARK code is not required if there is no alien DECT
system within the coverage area.
9. Enter AC code. The AC code length must be between 4 - 8 digits.
10. Press Next.
The system displays the Protection on? message.
11. To protect the new system, select Yes.
Note:
You cannot delete a protected system using the System menu. The unsubscription must
be made using the Admin menu or the DECT system.
12. Press OK.
A searching mode starts.

Unsubscribing the system

Procedure
1. Press Menu.
2. Select Connections.
3. Select System.
4. Select Unsubscribe.
5. Select the system to unsubscribe.
6. Press Yes.

Renaming the system

About this task
Use this procedure to change the name of the system in the handset.
Procedure
1. Press Menu.
2. Select Connections.
3. Select System.
4. Select Rename system.
July 2017 Using 3730 DECT Handsets with Communication Manager and IP Office
Comments on this document? infodev@avaya.com
Call answering settings
65