Installation Of Printer - Brother GTX-4 Instruction Manual

4-1. Installation of printer

Please refer to the Setup Manual included with the printer, for details of unpacking procedures and installation
procedures of accessories.
For an installation site of the printer, please bear the following points in mind:

When installing the printer, avoid any place that presents direct sunlight or a large amount of dust.

The body size is 55.1 in. (width) x 51.2 in. (depth) x 21.7 in. (height) (140 cm (width) x 130 cm (depth) x 55 cm
(height)). The main unit weighs 120 kg (264 lb).

The right-and-left width of the legs is 34.1 in. (86.7 cm) while the front-to-rear width is 16.7 in. (42.3 cm). The
diameter of the legs is 1.3 in. (33 mm).

The height from the table to the top surface of the platen is 12.5 in. (31.8 cm).

Do not use any extension cable.

As workspace in front of and on both sides of the printer, always keep 39.4 in. (100 cm) or wider space around it
from obstruction. Also, as a space to install the rear cover, keep 15.7 in. (40 cm) or wider clearance at the back
of the printer. Keep 15.7 in. (40 cm) or wider space free above the unit as well. As the air is exhausted toward
the rear side, keep 7.9 in. (20 cm) or more space open behind the exhaust opening.

In order for the waste ink tube not to be placed horizontally, be sure to install the main unit in such a manner that
it is inclined toward the left anterior side of its table.

Be sure to use a table that supports the printer should be at least 35.4 in. (90 cm) in width and 23.6 in. (60 cm) in
depth, and its top plate should be level and should be able to bear a weight of 150 kg (330 lb) or more without
rattling the printer when in operation.

When installing the printer, place a level gauge on the top surface of the cover and the top surface of the platen
to make adjustments so that the main unit is set horizontally level.

In preparation for a major earthquake or other natural disasters, fix the table and the main unit with a tool like a
fixing band to prevent the main unit from falling from the table.
Printer installation dimensions
106.3 in. (270 cm) or longer
Waste ink tube
133.9 in. (340 cm) or more
15.7 in. (40 cm) or more
39.4 in. (100 cm)
or more
39.4 in. (100 cm)
or more
35.4 in. (90 cm) or more
39
Installation and preparation
Exhaust opening
15.7 in. (40 cm) or more
39.4 in. (100 cm) or more
23.6 in. (60 cm) or more
Exhaust
X0127