Brother GTX-4 Instruction Manual page 311

Error code Error message
6111 [Machine Error]
6119 [Machine Error]
6130 [Machine Error Adjust CR]
6131 [Machine Error Adjust CR]
6132 [Machine Error Adjust CR]
6133 [Machine Error]
6134 [Machine Error]
6220 [Machine Error]
6221 [Machine Error]
Description
Carriage cannot perform
capping.
The carriage movement does
not come to a full stop.
It indicates an abnormal
decrease in the speed of
carriage.
It indicates an excessive
increase in the speed of
carriage.
The carriage stops at an
incorrect position.
It indicates an error in the
carriage speed adjustment
(reverse motion).
It indicates an error in the
carriage speed adjustment
(forward motion).
The color heads' temperature
level is abnormal.
The white heads' temperature
level is abnormal.
311
Remedy
Check to see if something gets caught in the
carriage or any foreign object exists inside the
printer.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the cleaning.
If the problem still persists, please contact your
dealer.
If the problem still persists even after restarting the
printer, please contact your dealer.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the carriage cleaning.
With reference to "7-4-1. CR (Carriage) speed
adjustment >>P.214", perform the carriage speed
adjustment.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the carriage cleaning.
With reference to "7-4-1. CR (Carriage) speed
adjustment >>P.214", perform the carriage speed
adjustment.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the carriage cleaning.
With reference to "7-4-1. CR (Carriage) speed
adjustment >>P.214", perform the carriage speed
adjustment.
Check to see if something gets caught in the
carriage or any foreign object exists inside the
printer.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the cleaning.
If the problem still persists, please contact your
dealer.
Check to see if something gets caught in the
carriage or any foreign object exists inside the
printer.
With reference to "7-1-5. Cleaning the internal area
of printer >>P.192", perform the cleaning.
If the problem still persists, please contact your
dealer.
Ascertain whether or not the cable for the heads is
disconnected.
If the problem still persists even after restarting the
printer, please contact your dealer.
Ascertain whether or not the cable for the heads is
disconnected.
If the problem still persists even after restarting the
printer, please contact your dealer.
Troubleshooting