Replacing The Platen Sheet - Brother GTX-4 Instruction Manual

7-2-5. Replacing the platen sheet

When the platen sheet gets soiled, replace it with a new one.
(1) Remove the platen from the main unit of the printer.
<TIPS>

For details, refer to "6-4-1. Replacing the currently used platen with another one >>P.143".
(2) Peel the platen sheet off the platen.
<TIPS>

When it is hard to peel the platen sheet off, warm it using a hair dryer or the like and peel it off.
(3) Wipe the surface of the platen with a clean cloth moistened with a mild detergent which is diluted with water, then
wipe the platen clean with a dry and soft clean cloth.
(4) Mount the platen in the main unit of the printer.
<TIPS>

For details, refer to "6-4-1. Replacing the currently used platen with another one >>P.143".
(5) Peel the release paper (small in size) off a new platen sheet.
Precautions to keep good printing quality/use printer over the long term
Platen
Platen sheet
205
Platen sheet
Release paper (small)
X0064
X0157