Brother GTX-4 Instruction Manual page 134

(3) Orient the pour spout of cock in the position as shown in the figure below.
Pretreatment
(4) Lean the entire shipping carton of pretreatment toward a container for dilution to pour the agent into the container,
and dilute it with pure water.
<IMPORTANT>

Use with the dilution rate of x3 (Pretreatment:Pure water=1:2) (Volume ratio).

Close the cap of the container for dilution, and shake it sufficiently to provide equal concentration.
Pretreatment
(5) To provide safekeeping for the pretreatment, close the cock, place the pretreatment with the cock part facing
upward, and store the entire carton in a safe place.
Container for dilution
134
Basic printing procedures
Cock
Pure water
X0081
X0082