Brother GTX-4 Instruction Manual page 308

Error code Error message
5603 [Machine Error]
5801 [Machine Error]
5802 [Machine Error]
5803 [Machine Error]
5804 [Machine Error]
6004 [Obstacle on the Platen]
6010 [PC Data Error]
6011 [Machine Error]
6012 [Machine Error]
6021 [No Battery]
Description
An abnormality was detected
when tried to check the ink
pouch.
It is the communication error
between the main board and
the panel board or the head
board.
It is the communication error
between the main board and
the panel board or the head
board.
It is the communication error
between the main board and
the panel board or the head
board.
It is the communication error
between the main board and
the panel board or the head
board.
It indicates some error in the
obstacle sensor.
The system failed to write the
EEPROM of the main board.
The system failed to erase
the FLASH ROM of the main
board.
The system failed to write the
FLASH ROM of the main
board.
The battery of the real-time
clock is fully exhausted.
308
Remedy
Check if the ink pouch is seated on the ink
cartridge correctly.
Ensure that the ink cartridge is correctly placed on
the printer.
If the problem still persists even after restarting the
printer, please contact your dealer.
Check to see if there is any source near the printer
that produces a loud noise.
If a USB flash memory is inserted into the printer,
remove the memory first, and then restart the
printer.
If the problem still persists even after restarting the
printer, please contact your dealer.
Check to see if there is any source near the printer
that produces a loud noise.
If a USB flash memory is inserted into the printer,
remove the memory first, and then restart the
printer.
If the problem still persists even after restarting the
printer, please contact your dealer.
Check to see if there is any source near the printer
that produces a loud noise.
If a USB flash memory is inserted into the printer,
remove the memory first, and then restart the
printer.
If the problem still persists even after restarting the
printer, please contact your dealer.
Check to see if there is any source near the printer
that produces a loud noise.
If a USB flash memory is inserted into the printer,
remove the memory first, and then restart the
printer.
If the problem still persists even after restarting the
printer, please contact your dealer.
Check to see if the obstacle sensor is covered with
something.
If the problem still persists even after restarting the
printer, please contact your dealer.
Make note of their error code and error message,
and please notify it to your dealer.
Make note of the error code and error message,
and please notify it to your dealer.
Make note of the error code and error message,
and please notify it to your dealer.
Make note of the error code and error message,
and please notify it to your dealer.
Troubleshooting