Brother GTX-4 Instruction Manual page 280

(31) Open the lid of the cartridge and place the ink pouch in its correct position.
<IMPORTANT>

Always open the cartridge lid and properly rewind the ink pouch. If the pouch is placed without opening the lid, ink can flow
into the wound section of the pouch when stirred, and cause improper winding of the pouch.

When opening the lid, place the entire cartridge on a flat surface, push the latches on the bottom surface of the cartridge
downward and open the lid.

When setting the ink pouch, avoid unevenness or wrinkles on the pouch.

When opening the lid, be sure not to touch the portion (a). Otherwise, it could be damaged.
<NOTE>

If the remaining ink level is low, hold the sagged part of the ink pouch and close the lid.
Place the pouch in straight alignment with the cartridge
Cartridge
(a)
No wrinkles
Ink pouch
Not sagged
280
Lid
Latch
Troubleshooting
X0182
Lid
X0078
X0142