Brother GTX-4 Instruction Manual page 296

Error code Error message
3412 [PC Data Error]
[USB flash drive Access
4100
Error]
[USB flash drive Access
4101
Error]
[USB flash drive Access
4103
Error]
[USB flash drive Access
4104
Error]
[USB flash drive Access
4105
Error]
Description
It is the communication error
between your PC and the
printer.
No file can be opened.
No file can be created.
File search has ended up in
failure.
The system has failed to read
the file.
The system has failed to write
the file.
296
Remedy
Check on the ARX4 file by means of "GTX-4 File
Viewer".
Make sure that your PC is connected to the printer,
and start communication between your PC and the
printer once again.
Restart your PC and the printer.
If the problem still persists, please contact your
dealer.
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Check on the content of USB flash memory.
Insert a USB flash memory into the slot again, and
perform the required operation once more.
If the problem is still not remedied, restart the
printer and try to operate it once again.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Troubleshooting