Restore Factory Settings; Reset Access Point; System Log - Nortel 2220 Using Manual

[Final Draft—Nortel Confidential]
Chapter 2 System Configuration 37
Remote - Select FTP or TFTP, and enter firmware file name, the host IP address,
user name, and password. Click "Start Upgrade" to start the upgrade process.
For latest firmware version information, visit Nortel's Web site at:
www.nortelnetworks.com and click Software Downloads under the Support
heading.

Restore Factory Settings

Click the "Restore" button to load the factory default configuration and reboot this
device. Note that all user configured information will be lost. You will also have to
re-enter the default user name (nortel) to regain management access to this device.

Reset Access Point

Clicking on the "Reset" button to perform a hardware reset of the access point.
Note: Current configurations will not be changed.

System Log

New screen coming with SNTP enhancements.
Using the Nortel Networks Wireless LAN Access Point 2220