Authentication Type Setup; Data Encryption; Standard Key Setup (Wep Default: 128) - Nortel 2220 Using Manual

[Final Draft—Nortel Confidential]
42 Chapter 2 System Configuration
WEP is implemented in this device to prevent unauthorized access to your
wireless network. The WEP setting must be the same on each client in your
wireless network.

Authentication Type Setup

You may choose either "Open System" or "Shared Key."
(Default: Open System)
If Shared Key is enabled, WEP should be enabled and at least one shared key
should be defined.

Data Encryption

You may choose "Enable" to enhance your network security with WEP data
encryption
(Default: Disable)
If Shared Key is enabled, WEP should be enabled and at least one shared key
should be defined.

Standard Key Setup (WEP Default: 128)

Default Shared Key – Choose the Shared Key that has the encryption string you
prefer (Key 1~3).
The access point supports "Shared Key" encryption with key lengths of the
standard 64-bit and industry standard 128-bit. The bit key can be in alphanumeric
characters, or hexadecimal numerals (0~9, A~F, e.g., D7 0A 9C 7F E5.)
64-Bit Manual Entry
Key 1~3 - Each Key ID contains 10 HEX digits, or 5 alphanumeric characters.
214853-A