Ip Configuration; Figure 7 Channel Screen - Nortel 2220 Using Manual

Lan

Hide thumbs Also See for 2220:

Table of Contents

[Final Draft—Nortel Confidential]

IP Configuration

DHCP Client: With DHCP (Dynamic Host Configuration Protocol) Client

enabled, the IP address, subnet mask and default gateway can be dynamically

assigned to the access point by an external network DHCP server on the network.

This device implements a DHCP client but not a DHCP server.

(Default: Enable)

DNS (Domain Name Servers) map domain name (e.g.,nortel.com) to the

equivalent numerical IP addresses. Your network administrator should provide the

IP address of one or more domain name servers. Enter those addresses on the

following screen.

Note: If there is no DHCP server on your network, then the access point

will automatically start up with its default IP address, 192.168.168.10.

Using the Nortel Networks Wireless LAN Access Point 2220

Chapter 2 System Configuration

Table of Contents