Radius; Figure 13 Radius Screen - Nortel 2220 Using Manual

[Final Draft—Nortel Confidential]
28 Chapter 2 System Configuration
DHCP Client: With DHCP (Dynamic Host Configuration Protocol) Client
enabled, the IP address, subnet mask and default gateway can be dynamically
assigned to the access point by the network DHCP server. (Default: Enable)
DNS (Domain Name Servers) map numerical IP addresses to the equivalent
domain name (e.g., www.nortelnetworks.com). Your network administrator
should provide the IP address of one or more domain name servers. Enter those
addresses on this screen.

Radius

Figure 13 Radius screen

214853-A
Note: You must turn off DHCP for the manual TCP/IP to be accepted.
Note: If there is no DHCP server on your network, then the access point
will automatically start up with its default IP address, 192.168.168.10.