Table of Contents
Advertisement
Fire Tone-Out Standby/Search
Tone-Out Standby Mode
Any transmission received on the frequency will not be heard but you will still see
the signal strength bars.
To monitor a different frequency, scroll to a tone-out (channel) with a different
frequency.
If you press HOLD while in Standby/Search mode, the scanner temporarily exits
and you will be able to hear any transmissions on that frequency. No alerts
sound, even if a tone-out matches one you have programmed in hold mode.
Press HOLD again to return to Standby/Search mode.
If the scanner finds tones in Tone-Out Search mode, you will see Set Found
Tone A and B? Press E/yes to save.
Tone-Out Search Mode
Select a different Tone-Out
Turn the Scroll Control.
Listen to Tone-Out Frequency
Press Hold.
Attenuation
Press Func then 4(
).
ATT
Modulation
Press Func then Channel(
).
MOD
Intermediate Frequency Exchange
Press Channel to hold on any
frequency. Press Func then 7(
) to toggle on or off.
IFX
Start/Stop Recording
Press Func then Replay.
Store Found Tones
Press E/yes at Save Found Tones?.
Tone-Out Menu
Press Func then Menu.
89
Advertisement
Table of Contents
