Table of Contents
Advertisement
Copy System
and settings including quick key assignments into the current Favorites List.
See Data Naming to name the new system.
Delete System
At Confirm Delete? press E/yes or .no.
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System you want to edit and press E/yes.
Scroll to Edit Sys Options and press E/yes.
Note: Not all options will appear for all types of systems.
Set Quick Key
Set Number Tag
Set Avoid
Set Hold Time
ID Search
Edit Fleet Map
Set Quick Key
System when the key is enabled. The default setting is . (no quick key). If you
don't assign a System to a quick key, it will always be scanned unless Set Avoid
(below) is set to Avoid or Temporary Avoid.
0-99 or . for no quick key. Note: Pressing the first number of a 2-digit quick key
will get you closer, 1 for 10, 2 for 20, etc., then scroll to second digit.
Set Number Tag
quickly from scan hold mode.
The default setting is no number tag. See also Using Number Tags.
0-99
Set Avoid
This determines whether a System will be scanned or not (even if
the system is enabled). Temporary Avoid cancels when you cycle power.
The default setting is Stop Avoiding.
Temporary Avoid, Stop Avoiding, or Avoid
See also Scan Avoids.
System Settings
Copying a system will copy all Sites, Departments, Channels,
System Options
Priority ID Scan
Set Status Bit
Set End Code
Emergency Alert
Review ID Avoids
This assigns a quick key to the System and will scan the
This allows you to number a System so you can access it
Clear All ID Avoids
Set Audio AGC
P25 NAC Option
P25 Waiting Time
P25 Threshold Mode
P25 Threshold Level
45
Advertisement
Table of Contents
