Table of Contents
Advertisement
Set Audio Type
might contain both digital and analog signals. If you are sure the channel is
analog set the channel to Analog Only. This will prevent the P25 Waiting Time
for the conventional system from losing the first part of the transmission up to the
wait time you set there.
All - The scanner determines whether the audio is analog or digital.
Digital Only - The scanner will receive the channel only if it is carrying APCO
25 digital audio.
P25 NAC Option
Search - the scanner searches and displays any NAC tone received.
Set P25 NAC - allows you to program a NAC code. See Data Naming.
Note: You can also store a (blinking) NAC code when receiving the
frequency in scan mode by pressing E/yes.
Analog Only - The scanner will only receive analog audio.
Set CTCSS/DCS
Search - The scanner searches and displays any CTCSS or DCS tone.
Note: You can also store a (blinking) CTCSS/DCS tone when receiving
a frequency in scan mode by pressing E/yes.
CTCSS - Scroll to the desired CTCSS tone. Press E/yes to save.
DCS - Scroll to the desired DCS tone. Press E/yes to save.
Set Avoid - Scroll to CTCSS or DCS and press E/yes.
Scroll to the desired tone you want avoided and press E/yes to save.
Set Number Tag
quickly from scan hold mode.
The default setting is no number tag. See also Using Number Tags.
0-999
Set Modulation
used for the channel. The default setting is Auto.
Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)
See also Scan Modulation.
Set Attenuator
scanner attenuates signals on the Channel by about 20dB.
The default setting is Off.
On or Off
See also Scan Attenuation.
56
Channel Options
(Conventional/Motorola Only) Select All if this channel
This allows you to number a Channel so you can access it
(Conventional Only) This setting selects the modulation
(Conventional Only) This setting controls whether the
Advertisement
Table of Contents
