Table of Contents
Advertisement
Set Time
Set Hour Enter the Hour (0-23).
Set Minute Enter the minute.
Set Time Zone
Scroll to your time zone.
Daylight Saving
On or Off.
Replay Options
rename recording sessions.
Set Replay Duration
30, 60, 90, 120, 150, 180, 210, or 240 sec.
Review Recordings
Recording Session
Play Session. See Replaying Transmissions.
Delete Session
At Confirm Delete? Press E/yes or .no.
Rename Session See Data Naming.
Restore Options
profile settings to default.
Clear User Data
(Full Reset) will delete all Favorites Lists, locations, reset all profile options to
default, clear all Avoids, delete all recording sessions, all discovery logs, and
all weather event records.
Note: Pressing and holding 2, 9, and Dept when you power on the
scanner will also clear all user data.
Reset User Settings
Will only reset all profile settings and Favorites List will be saved.
See Scanner Info
firmware version, and scanner serial number.
Keypad Lock
Dept, System for hold mode, Func, and the Scroll Control for volume.
Press Channel to hold and press Func then
View the Battery Level
To view the battery level (in volts) press the scroll control and look at the small
numbers in the upper right of the display. Press the scroll control again to close
the volume level or let it disappear after 10 seconds.
38
Settings Menu
This allows you to set the recording duration and delete or
Allows you to clear all user data (full reset) or reset just
This will show you how much memory is in use, the
(BCD436HP Only) The only keys/knobs that work are Channel,
(BCD436HP Only)
to toggle the keypad lock.
Advertisement
Table of Contents
