Programming Sites - Uniden BCD436HP User Manual

P25 Waiting Time
to determine if channels on Conventional Systems have digital or analog
transmissions. During this time, the scanner will evaluate the received signal and,
if it detects digital data, will open squelch immediately. If digital is not detected
before the delay expires, the scanner will open squelch at the end of this delay.
This is to prevent "false decode" problems. This setting only affects conventional
channels with an Audio Type set to All. The default setting is 400 ms.
0 to 1000
Note: Any analog transmissions will lose the first part of the transmission, up
to the wait time you set here.
P25 Threshold Mode
Auto -
Manual -
Default -
P25 Threshold Level
1 to 20
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Site and press E/yes.
Scroll to New Site and press E/yes
To Create a New Site scroll to New Site and press E/yes.
To Edit an Existing Site scroll to the Site and press E/yes.
Note: Not all options will appear for all sites.
Edit Name
Set Site Type
Edit Band Plan
Set Frequencies
48
System Options
(Conventional Only) This setting gives the scanner time
(Conventional Only) The default setting is Auto.
(Conventional Only) The default setting is 8.

Programming Sites

New Site/Site Options
Set Modulation
Set Attenuator
Set Avoid
Set Location Information
P25 Waiting Time
P25 Threshold Mode
P25 Threshold Level
Delete Site
New Site