Table of Contents
Advertisement
Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking/Conventional Discovery and press E/yes.
Scroll to the Discovery Session and press E/yes.
Start Discovery
Edit Session Name
Set Limit Frequencies
Set Modulation
Set Step
Set Delay
Set Logging
Start Discovery
Press Menu to stop and review the Run information. See Review Discovery.
Press Avoid to Avoid a hit.
Press Func then System to exit.
Edit Session Name
See Data Naming.
Set Limit Frequencies
This sets the lower and upper frequencies for conventional discovery session.
Set Lower Limit Enter the lower limit.
Set Upper Limit Enter the upper limit.
Set Modulation
conventional discovery session.
Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)
Set Step
(Conventional Only) This sets the step size for conventional
discovery session.
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz.
Set Delay
This sets the Delay when monitoring a site or frequencies.
0, 1, 2, 3, 4, or 5 sec.
Set Logging
All or New Only
Session Options
This starts the Discovery Session.
This allows you to name a Session.
(Conventional Only)
(Conventional Only) This sets the modulation for
This will log all hits or just new hits.
Set Compare to Database
Set Record Duration
Set Time-Out Timer
System Info
Set Auto Store
Delete Session
Change System
71
Advertisement
Table of Contents
