Direct Frequency Entry; Frequency Intermediate Exchange - Uniden BCD436HP User Manual

Modulation
Press Func then Channel(

Direct Frequency Entry

Press Channel Hold on any frequency. Enter the frequency and press Menu.
Press Channel to release hold.

Frequency Intermediate Exchange

frequency. Press Func then 7(
Repeater Frequency
Press Func then press and hold 8(
Replay the Last Transmissions
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
Storing Frequencies
Displayed Frequency into a Quick Save Department Press E/yes.
You will see Saving to Quick Dept in the display then press E/yes.
The scanner stores the ID into the Quick Save Department.
Displayed Frequency into an Existing Department Press E/yes.
You will see Saving to Quick Dept in the display then press .no.
At Select Department Scroll to the department where you want to store the
frequency and press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete
the settings for the new channel.
If you don't want to edit the channel settings or are done editing the channel,
press Avoid to return to searching.
Search Menu
Close Call Modes
(BCD536HP) Press SQ( ).
(BCD436HP) Press Func then Avoid( ).
Weather Alert Priority Mode
Press Func then 6(
Searching
- Press Channel to hold on any frequency.
While searching, press Func then Replay.
- Press Func then Menu.
To toggle CC Off, CC Pri, or CC DND.
) to toggle on or off.
WX
) for each band.
MOD
- Press Channel to hold on any
) to toggle on or off.
IFX
).
REV
While searching, press Replay.
Press Channel to hold on any channel.
79