Weather Alert Priority
the scanner to check the weather channels every 5 seconds for a 1050 Hz
weather alert signal and still scan or search. If you should receive an alert, you
will hear a loud warbling then the weather channel audio.
On or Off
Note: You can also toggle weather alert priority in scan or search modes by
holding on any channel and pressing Func then 6(wx).
Press Channel to hold on any channel/frequency. Press and hold 6(
The scanner starts scanning the preprogrammed weather frequencies and stops
on the first good signal. If the signal is lost, the scanner resumes searching for
another weather transmission.
Change Channel
Turn the Scroll Control.
Attenuation
Press Func then 4(
Modulation
Press Func then Channel(
Intermediate Frequency Exchange
frequency. Press Func then 7(
Replay the Last Transmissions
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
Weather Menu
Weather Options
Turning the weather alert priority feature on allows
Weather Scan
IFX
Press Func then Replay.
- Press Func then Menu.
).
ATT
).
MOD
- Press Channel to hold on any
) to toggle on or off.
Press Replay.
).
WX
85