Table of Contents
Advertisement
Hits with Scan
close call hits and allows you to scan them. Accessible only in the Close Call
menu, the system has to be Unavoided to view while scanning (default is
Avoided). The scanner will delete the frequencies in this system when you turn
the power off.
Set Avoid
Temporary Avoid, Stop Avoiding, or Avoid
Set Hold Time Sets how long to search when scanning.
0-255 sec.
Set Close Call Mode
searching.
Off- Close Call is turned off.
CC DND- Close Call checks for frequencies every two seconds between
transmissions.
CC Priority- Close Call checks for frequencies every two seconds.
You can also toggle these modes by: (BCD536HP) Pressing SQ( ).
(BCD436HP) Holding on any channel and pressing Func then Avoid/ .
Set CC Bands
Scroll to each Band and press E/yes to toggle On or Off.
Press Menu to return.
VHF Low 1 - 25-54MHz
VHF Low 2 - 54-108 MHz
Air Band - 108-137 MHz
VHF High1 - 137-225 MHz
Set CC Alert
Pause time for Close Call when you receive a hit.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Set CC Pause
3, 5, 10, 15, 30, 45, 60, sec. or Infinite.
Close Call Options
This is a special system that automatically stores the last 10
selects the Close Call mode when scanning or
lets you select the Close Call bands to be searched.
This allows you to set an Alert Tone, Alert Light, and sets the
VHF High2 - 225-320 MHz
UHF - 320-512 MHz
800MHz+ - 758-960, 1240-1300 MHz
81
Advertisement
Table of Contents
