Configuring Dnd Modes Using The Ip Phone Ui - Mitel 6920 User Manual

Mitel 6920 SIP Phone User Guide
4. Click on Basic Settings > Account Configuration.
5. For each account, enable DND by placing a check mark in the box. Disable DND by unchecking
the box.
Notes:
1. If you selected Account or Custom mode in Step 2, you can enable/disable each
account or all accounts as applicable. If you selected Phone mode, the first account
allows you to change the DND status for all accounts.
2. Number and name of accounts that display to this screen are dependent on the
number and name of accounts configured on the phone. Only your Administrator
can create accounts for your phone. Contact your Administrator for more information.
6. Click Save Settings.
The changes takes affect immediately without a reboot.

Configuring DND Modes Using the IP Phone UI

After you add a DND key to your phone, you can toggle the DND state using this key on the phone.
Use the following procedure to enable/disable DND on the IP phone.
The following procedures assume you have already configured a DND key AND assumes there are
multiple accounts configured on the phone.
DND in Account Mode
1. From the Home screen press the right navigation key to move to the Line Selection screen.
2. Highlight the desired account using the up and down navigation keys.
3. Press the left navigation key to go back to the Home screen
4. With the account in focus on the Home screen, press the DND softkey to toggle DND on or off
for the account.
clii