Configure Ip Address; Show The Current Ip Address - Planet SGSW-24040 Quick Installation Manual

5. Configure IP address

The WGSW / SGSW Managed Switch is shipped with default IP address as
following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follow:

Show the current IP address

1. On "Switch/>" prompt, enter "show ip".
2. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Figure 5-1 Show IP information screen