Logon To The Console - Planet SGSW-24040 Quick Installation Manual

4. Logon to the Console

Once the terminal has connected to the device, power on the WGSW / SGSW
Managed Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login password. The factory default password
as following and the login screen in Figure 4-1 appears.
Password: admin
Figure 4-1 WGSW / SGSW Managed Switch Console Login screen
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.