Terminal Setup - Planet SGSW-24040 Quick Installation Manual

3. Terminal Setup

To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the WGSW / SGSW Managed
Switch. The console port of the Managed Switch is DCE already, so that you can
connect the console port directly through PC without the need of Null Modem.
A terminal program is required to make the software connection to the WGSW /
SGSW Managed Switch. Windows' Hyper Terminal program may be a good choice.
The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
ó
Parity: None
ó
Data bits: 8
ó
Stop bits: 1
ó
Flow Control: None
ó