Table of Contents
Advertisement
Care and cleaning
34
Fitting the side racks and catalytic panels
Remove all shelves and trays.
1
For easier access to the fixing screws, you may remove the oven door first. See 'Removing the
2
oven door. '
Using a small coin or a flat-head screwdriver, loosen and remove the front and back fixing screws,
3
as shown.
Remove the side rack.
4
Fit the catalytic panel. When fitting the side catalytic panels, make sure that:
5
- the arrows are pointing upwards
- the panel with the hole is on the right oven wall.
Refit the side racks.
6
- make sure that they are the right way up, as in the illustrations, and that you tighten the fixing
screws.
If not already fitted, fit the telescopic sliding shelf supports.
7
HOLE FOR ROTISSERIE
Advertisement
Table of Contents
