Table of Contents
Advertisement
Fitting the anti-tilt bracket
Important!
To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it securely to the
wall.
If installing the cooker above a plinth (without fitting the adjustable feet), revise the installation dimensions
accordingly considering that the feet have the following measures: min 155 mm - max 180 mm.
To fit the anti-tilt bracket:
After you have located where the cooker is to be positioned, mark on the wall the place where
1
the two screws of the anti-tilt bracket have to be fitted. Please follow the indications given in
Fig10a.
Drill two 8 mm diameter holes in the wall and insert the plastic plugs supplied.
2
Important!
Before drilling the holes, check that you will not damage any pipes or electrical wires.
Loosely attach the anti-tilt bracket with the two screws supplied.
3
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in
4
the slot on the cooker's back, as shown in Fig.10a.
Tighten the screws attaching the anti-tilt bracket.
5
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in the slot on the
6
cooker's back.
0
+ 25
min 210 mm
max 235 mm
(depending on feet adjustment)
Fig. 10a Fitting the anti-tilt bracket
Installation instructions
Slot on the
cooker's back
Fig. 10b Fixing the anti-tilt bracket to the wall.
9
Anti-tilt bracket
attached on the
rear wall
Cooker's
back
Advertisement
Table of Contents
