Table of Contents
Advertisement
Using your ceramic glass cooktop
25
Using the elements
Using the single elements
To turn on a single element, turn its knob clockwise to a setting between 1 (minimum) and 12
(maximum). Adjust the heat during cooking by turning the knob in either direction between 1
and 12.
To turn a single element off, turn its knob to the 0 (off ) position. You should also feel a click.
Using the dual element (Figs. 22 and 23)
To turn on the inner zone of the dual element, turn the dual element knob clockwise to a
setting between 1 (minimum) and 12 (maximum). Adjust the heat during cooking by turning the
knob in either direction between 1 and 12. See Fig. 22.
To turn on both zones of the dual element, turn the dual element knob fully clockwise to
the
position (arrow 1 in Fig. 23). To reduce the heat of the full dual element, turn its knob
anticlockwise to setting 12 (arrow 2 in Fig. 23) or lower. Adjust the heat during cooking as
necessary. Note: if you leave the knob at the
position, the full dual element will remain at the
highest heat setting.
To return to using only the inner zone of the dual element, first turn the knob to the 0 (off )
position -you should feel a click- and then clockwise to a setting from 1 to 12.
To turn the dual element off, turn the knob to the 0 (off ) position. You should also feel a click.
Important!
Be sure you turn the control knobs off when you finish cooking. You will feel a click at the 0 (off) position.
1
2
Fig. 22 Turning on the inner
Fig. 23 Turning on both zones
zone of the dual element
of the dual element
Advertisement
Table of Contents
