Set Mode Setting - Icom iC-A14 Instruction Manual

6
OTHER FUNCTIONS
■

Set mode setting

The Set mode is used to program infrequently changed func-
tion items or options.
D Entering the set mode
q Rotate [VOL] to turn the
transceiver power OFF.
w While pushing and holding
[Y] and [Z], turn [VOL] to
enter the Set mode.
e Push [MR] several times
to select the desired Set
mode item.
r Push [Y]/ [Z] to select the
desired condition or value
for the item.
t Push [CLR] to return to fre-
quency mode.
For the IC-A14 only
Push [FUNC] then holding down [SET](ENT) for 1 second to
also enters into the Set mode.
For your information:
The default value of the Set mode items can be changed
with the optional CS-A14 cloning software. The default
settings are recalled by the home function.
25
[VOL]
[Y] [MR]
[Z] [CLR]
D Set mode items
• ANL— ANL function
(available with IC-A14S only)
Sets the ANL
(Automatic Noise Limiter)
noise components such as that caused by engine ignition
systems while receiving.
• BEEP— Key touch beep
The beep tone which sounds at the push of a switch can be
set, if desired.
• MIC— Microphone gain
The internal microphone gain can be set to suit your needs.
"H" (High gain), "M" (Medium gain) and "L" (Low gain) can
be selected.
function that reduces
(available with IC-A14S only)