Changing The Language; Changing The Session Timeout - Dymo LabelWriter User Manual

To rename the printer
Log in to the Web Configuration utility.
1
See Accessing the Web Configuration Utility on page 15.
From the menu, select Printer name.
2
Enter a new name for the printer and click Save.
3

Changing the Language

The default language for the Web Configuration utility is English. When you change
the language, that language will be remembered the next time you log in to the
utility.
To change the language
Log in to the Web Configuration utility.
1
See Accessing the Web Configuration Utility on page 15.
From the menu, select More>Language.
2
Select the desired language and click Save.
3

Changing the Session Timeout

A Web Configuration utility session will end after 15 minutes of inactivity and you
will have to log in again. You can change the amount of time before a session
ends but the time should not be less than 10 minutes.
To rename the printer
Log in to the Web Configuration utility.
1
See Accessing the Web Configuration Utility on page 15.
From the menu, select More>Timeout.
2
Select and click Save.
3
20 DYMO LabelWriter Wireless
User Guide